Marklin CS1, DSD2010 and TrainController 9 Gold
-
- Beiträge: 605
- Registriert: So 22. Apr 2012, 07:46
- Wohnort: Meckenbach
Re: Marklin CS1, DSD2010 and TrainController 9 Gold
Hello,
This signal you can use in TC.
The feedback signal RM1 ( Active ) can only use with a Bahnwärter/ signalman!
Regards
Wolf Ulrich
DSD2010 has a feedback signal RM7 = Done Impuls.The main question however is : what shall I put as feedback in the traincontroller screen for "turntable properties>connection>position control>feedback"???
This signal you can use in TC.
The feedback signal RM1 ( Active ) can only use with a Bahnwärter/ signalman!
Regards
Wolf Ulrich
MoBaSbs, TAMS-MC, Märklin-M, MM, TC-Gold, DSD-2010 mit *Anzeigemodul* für Mä-7286
-
- Beiträge: 38
- Registriert: Fr 25. Jan 2019, 13:26
Re: Marklin CS1, DSD2010 and TrainController 9 Gold
Yes but where I find it?
How do I say to traincontroller where rto find it?
In traincontroller I have to specify a feedback for position control in turntable properties, what should I write there?
Thanks for your patience
Andrea
How do I say to traincontroller where rto find it?
In traincontroller I have to specify a feedback for position control in turntable properties, what should I write there?
Thanks for your patience
Andrea
-
- Beiträge: 605
- Registriert: So 22. Apr 2012, 07:46
- Wohnort: Meckenbach
Re: Marklin CS1, DSD2010 and TrainController 9 Gold
Hello,
the RM7 is in the S88-Bus integrated.
You must integrate the S88-Modul of Platine-Ground in your s88-System of CS1.
In TC you must create contact detector with adress: ( s88 Module Adress-Nr ) / Input: 7
If you connect DSD-2010 S88 to S88-Input of CS1 at first position and DIP-Switch is set to "Two Bytes"
the contact detector adress: 1 / Input 7 and you named it "DSD2010-Done"
in the Entryfield position control / turntable properties You Search in the List this Name and after doubleclick the name is in the entryfield.
Sorry I don't know nothing about your Feedback system and the integration of this in TC.
So I can give no better help.
Regards
Wolf Ulrich
the RM7 is in the S88-Bus integrated.
You must integrate the S88-Modul of Platine-Ground in your s88-System of CS1.
In TC you must create contact detector with adress: ( s88 Module Adress-Nr ) / Input: 7
If you connect DSD-2010 S88 to S88-Input of CS1 at first position and DIP-Switch is set to "Two Bytes"
the contact detector adress: 1 / Input 7 and you named it "DSD2010-Done"
in the Entryfield position control / turntable properties You Search in the List this Name and after doubleclick the name is in the entryfield.
Sorry I don't know nothing about your Feedback system and the integration of this in TC.
So I can give no better help.
Regards
Wolf Ulrich
MoBaSbs, TAMS-MC, Märklin-M, MM, TC-Gold, DSD-2010 mit *Anzeigemodul* für Mä-7286
-
- Beiträge: 38
- Registriert: Fr 25. Jan 2019, 13:26
Re: Marklin CS1, DSD2010 and TrainController 9 Gold
Thanks for all Wolf
Andrea
Andrea
-
- Beiträge: 605
- Registriert: So 22. Apr 2012, 07:46
- Wohnort: Meckenbach
Re: Marklin CS1, DSD2010 and TrainController 9 Gold
Hello,
here some screenshoots
Regards
Wolf Ulrich
here some screenshoots
Regards
Wolf Ulrich
MoBaSbs, TAMS-MC, Märklin-M, MM, TC-Gold, DSD-2010 mit *Anzeigemodul* für Mä-7286
-
- Beiträge: 605
- Registriert: So 22. Apr 2012, 07:46
- Wohnort: Meckenbach
Re: Marklin CS1, DSD2010 and TrainController 9 Gold
MoBaSbs, TAMS-MC, Märklin-M, MM, TC-Gold, DSD-2010 mit *Anzeigemodul* für Mä-7286
-
- Beiträge: 605
- Registriert: So 22. Apr 2012, 07:46
- Wohnort: Meckenbach
Re: Marklin CS1, DSD2010 and TrainController 9 Gold
Hello,
did you clean the motor?
the difference between current left and current right is to much and the current of 20mA is to low.
Regards
Wolf Ulrich
did you clean the motor?
the difference between current left and current right is to much and the current of 20mA is to low.
Regards
Wolf Ulrich
MoBaSbs, TAMS-MC, Märklin-M, MM, TC-Gold, DSD-2010 mit *Anzeigemodul* für Mä-7286
-
- Beiträge: 605
- Registriert: So 22. Apr 2012, 07:46
- Wohnort: Meckenbach
Re: Marklin CS1, DSD2010 and TrainController 9 Gold
Hello,
- turntable sound loaded on susi modul?
- with Ohmmeter check if there is less than 8Ohm at lautspeacker cable
Warning:
Volume is set to 255 this is maximum.
No good idea, because loudspeaker can be damaged on turning system on.
Regards
- Loudspeaker 8Ohms and soundbody correct connected to susi modul?Sound is not working at all.
- turntable sound loaded on susi modul?
- with Ohmmeter check if there is less than 8Ohm at lautspeacker cable
Warning:
Volume is set to 255 this is maximum.
No good idea, because loudspeaker can be damaged on turning system on.
Regards
MoBaSbs, TAMS-MC, Märklin-M, MM, TC-Gold, DSD-2010 mit *Anzeigemodul* für Mä-7286
-
- Beiträge: 38
- Registriert: Fr 25. Jan 2019, 13:26
Re: Marklin CS1, DSD2010 and TrainController 9 Gold
7,3 Ohm at loudspeaker, less than 8.
No sound
Thanks
No sound
Thanks
-
- Beiträge: 38
- Registriert: Fr 25. Jan 2019, 13:26
Re: Marklin CS1, DSD2010 and TrainController 9 Gold
The sound does not work but also the blinking led has never worked.
Maybe the two things are due to the same problem? (the BÜHNE ?)
The house led works well, with TC 9 and with CS1 alone.
Thanks for any help
Andrea
Maybe the two things are due to the same problem? (the BÜHNE ?)
The house led works well, with TC 9 and with CS1 alone.
Thanks for any help
Andrea